Our Products

Horizontal Shaft Impactor - HSI

Enquiry Now

Features

  • SSD M – Sand Machine HSI (Horizontal Shaft Impactor Crusher) is specially designed to produce M – Sand from (-) 40 mm size aggregates.
  • Its productivity is high consuming less power. Top housings can be opened for maintenance through a hydraulic system.
  • The hydraulic system is inbuilt into the machine.
  • The rotor is dynamically balanced to eliminate vibrations and stresses. Rotor discs are strengthened and covered from wear plates.
  • Body Internal hull is fully layered with wear resisting lining plates. The blow bars, impact plates and liner plates are of heavy wear resistant special alloy steel.
  • Blow bars can be reversed when top side is worn-out.
  • Wear status can be seen through inspection door on the sides. Very easier to operate and maintain.
TECHNICAL SPECIFICATIONS​
Model No Rotor Diameter (mm) Feed Size (mm) Power KW (HP) Rotor Speed (RPM) Capacity (TPH)
HSI – 680
1000
< 40
55 (75)
1100
50 – 75

Vertical Shaft Impactor - VSI

Enquiry Now

Features

  • SSD M – Sand Machine VSI (Vertical Shaft Impactor Crusher) is specially designed to produce M – Sand, with a unique rock-on-rock crushing and rock-on-steel principle.
  • No wear parts are used to directly crush the rock. Rotor is dynamically balanced.
  • Low wear cost and superior cubical shape.
TECHNICAL SPECIFICATIONS​
Model No Rotor Diameter (mm) Feed Size (mm) Power KW (HP) Rotor Speed (RPM) Capacity (TPH)
VSI – 720
720
< 20
110 (150)
1350
90 – 120

Jaw Crushers - Single Toggle

Enquiry Now

Features

  • SSD Jaw Crushers are of Single Toggle Mechanism with either oil lubricated or Grease lubricated Model.
  • Single Toggle Mechanism gives high Productivity.
  • Balanced heavy double flywheel is used in this machine.
  • Heavily built fabricated body is stress relieved.
  • Jaw stock is made of Steel Casting and precisely machined.
  • Eccentric Shaft is made out of Forged, Ultrasonically tested and Heat Treatment processed before Grinding.
  • The serrated Jaw plates of multi optional design to give the designated output.
TECHNICAL SPECIFICATIONS​
Primary and Secondary Single Toggle Jaw Crushers
Crusher Size Feed Size Power KW (HP) Crusher Speed (RPM) Capacity (TPH) Weight (TON)
24″ x 16″
Upto 14″
37 (50)
290
25 – 50
7
30″ x 8″
Upto 6″
55 (75)
320
35 – 45
8
30″ x 24″
Upto 20″
55 (75)
290
40 – 90
13

Jaw Crushers

Enquiry Now

Features

  • We manufacturing primary and secondary crushers.
  • SSD Jaw Crushers are of double toggle Mechanism with oil lubricated Model.
  • Double Toggle Mechanism Minimizes Wear and reduces Power Consumption.
  • A heavy single balanced flywheel transmits the power to this machine.
  • The serrated jaw plates of multi optional design to give the designated output.
  • Heavily built fabricated. body and jaw stocks are stress relieved.
  • The hinge pin shaft is uniquely provided with spherical roller bearings on either side.
TECHNICAL SPECIFICATIONS​
Primary Jaw Crushers
Crusher Size Feed Size Power KW (HP) Crusher Speed (RPM) Capacity (TPH) Weight (TON)
24″ x 14″
Upto 12″
37 (50)
320
50 – 60
6.5
30″ x 15″
Upto 13″
37 (50)
320
60 – 75
8.5
30″ x 24″
Upto 21″
55 (75)
320
75 – 100
15
36″ x 30″
Upto 27″
75 (100)
300
100 – 150
24.5
Secondary Jaw Crushers
Crusher Size Feed Size Power KW (HP) Crusher Speed (RPM) Capacity (TPH) Weight (TON)
20″ x 12″
Upto 9″
30 (40)
320
20 – 25
5.5
30″ x 8″
Upto 6″
37 (50)
320
20 – 25
6
30″ x 10″
Upto 8″
45 (60)
320
25 – 30
7
48″ x 9″
Upto 6″
45 (60)
320
40 – 50
14.5

Vibrating Screen

Enquiry Now

Features

  • SSD Vibrating screens are efficient screening of crushed materials.
  • The screens are offered in multiple decks.
TECHNICAL SPECIFICATIONS​
Model No Screen Size No of Deck Screen Area (sq ft) Power (HP)
VIB – 840
8″ x 4″
2 – 3
32
7.5 – 10
VIB – 124
12″ x 4″
2 – 4
48
10 – 15
VIB – 125
12″ x 5″
2 – 4
60
10 – 15
VIB – 165
16″ x 5″
2 – 4
80
15 – 20

Sand Washer with Dewatering Screen

Enquiry Now

Features

  • SSD sand washer with dewatering screens adopting advanced technology for high efficient sand washing.
  • It is improve the sand quality by washout the tiny stone powder and impurities mixed in the sand.
  • Manufactured sand (M – Sand) and plastering sand (P – Sand) can be separately achieved on the same time.
  • Dewatering screen utilize two high frequency motor to ensure maximum dewatering of the sand product.
TECHNICAL SPECIFICATIONS​
Model No Drive Motor Power KW (HP) Vibrating Motor Power KW (HP) Rotor Speed (RPM) Feed Size (mm) Capacity (TPH)
SW – 100
5.5 (7.5)
2 x 2.2 (3)
3.3
< 5
100

Dewatering Screen

Enquiry Now

Features

  • SSD dewatering screen utilize two high frequency vibrating motors to ensure.
  • Maximum dewatering of the sand product the use of modular polyurethane panels ensures quick and easy replacement when necessary.
  • Reduce the loss of quality sand and reduce maintenance cost.
TECHNICAL SPECIFICATIONS​
Model No Screen Size Vibrating Motor Power KW (HP) Feed Size (mm) Capacity (TPH)
DS – 54
5″ x 4″
2 x 1.5 (2)
< 5
30
DS – 64
6″ x 4″
2 x 2.2 (3)
< 5
40
DS – 84
8″ x 4″
2 x 2.2 (3)
< 5
50

Vibratory Feeder

Enquiry Now

Features

  • SSD Vibratory Feeders are specially designed to our crusher for feed to the full width of the crusher mouth opening.
  • Two high frequency vibrating motor is used to control the uniform flow and volume of material.
TECHNICAL SPECIFICATIONS​
Model No Length (mm) Width (mm) Vibrating Motor Power KW (HP) Feed Size (mm) Capacity (TPH)
VF – 680
1200
680
2 x 0.75 (1)
< 40
50 – 100

Crusher Magnet

Enquiry Now

Features

  • SSD Crusher magnet is specially designed for crushers particularly for M – Sand machines.
  • SSD Magnet can be used to avoid accident by cause of iron material fed into the crushing chamfer when crusher running.
  • It is permanent magnet set with holding arrangements.
  • Easily it can be hanged on top of the crushed conveyor.
TECHNICAL SPECIFICATIONS​
Length (mm) Width (mm) Height (mm) Weight (mm) Clearance Between Magnet & Conveyor (mm)
500
500
250
270
100